BVM FURY 3D RAISED PANELS     $50

Pro Mark is introducing a new product for scale or sport models, Peel and Stick Raised Panels. The panels can be left unpainted to simulate aluminum or painted to match any scheme. To paint rub them with 0000 steel wool before removing them from the sheet. Use an Xacto blade to raise a corner and remove it from the sheet. Then position the panel in place and press it to the surface. Scale Tips To simulate chipped paint, simply chip or sand the leading edge of the raised panel to allow the metal finish to show through. Or brush on rubber cement in the desired pattern, then paint the panel. After the paint drys, peel off the rubber cement and again you have simulated chipped paint.